Medium Duty E-Z Change

Medium Duty E-Z Change

Standard Line Medium Duty E-Z Change Primary Cleaner

The Standard Line Medium Duty E-Z Change Cleaner is designed for cleaning belts in tight applications where initial cost is a factor. It has a straight-through shaft design using the same tensioners as the Medium Duty Head Shed CleanerIt is used in some mining applications, most power plant, aggregate, coal prep, and other demanding applications.

Click here to download the Medium Duty E-Z Change Standard Line Datasheet

Click here to download the Cleaner RFQ Form

 

Standard Line Medium Duty E-Z Change
 The Standard Line Medium Duty E-Z Change Advantages:
  • Medium Duty Primary Cleaner
  • All stainless steel hardware
  • Straight through shaft design with straight through tensioners
  • One piece solid blade design maintains proper contact with the cleaning surface
  • Solid blade unit installs with just two bolts
  • Solid blade design maintains proper contact with cleaning surface
  • Powder Coated shaft
  • Shaft is 3/8" wall thickness DOM mechanical tubing
  • Shaft has pre-drilled holes to accommodate various blade sizes

 

Tensioning Systems

The Standard Line Medium Duty E-Z Change is available with both Air/Water and Mechanical Tensioners.

Air/Water Tensioners (CSHSMDSTD-N/A-A)
Medium Duty E-Z Change Air/Water Tensioners
  • Dual activator tensioning unit functions on plant air, water or CO2
  • Optional air source housed in protective cabinet (Closed system provides long life to air tank)
  • Designed to provide constant tension to the cleaner
  • Suited for difficult to access locations
  • Simple valve operation allows tension to be released quickly to speed up blade changes and maintenance
  • Water regulators are provided with pressure relief valve to prevent over pressurizing. Commonly used in underground applications where service water is available and freezing is not an issue.
  • Plant air regulator systems are used in above ground applications and where freezing is an issue
  • Optional CO2 regulator systems are used in remote and mobile applications such as stacker conveyors, and remote overland discharges where plant air in not readily available.
Mechanical Tensioners (CSHSMDST01-N/A-A)

 Medium Duty E-Z Change Mechanical Tensioner

  • Designed to provide adjustable tension to the cleaner
  • Suited to locations that are not difficult to access
  • Requires tension to be monitored and adjusted as the blade wears
  • Lower cost system but requires more maintenance attention during its life
  • No risk of losing cleaning ability because of a failed air or water supply

 

Blades

The Standard Line Medium Duty E-Z Change Cleaner is only offered with a one piece solid blade that is designed to maintain proper contact with the cleaning surface.

Standard Line Medium Duty E-Z Change Solid Blade (CXMD-EZ-XX)
XX Denotes Blade Length
Standard Line Medium Duty E-Z Change Solid Blade
  • The only offering for the Medium Duty E-Z Change 
  • Frequently used where ease of blade replacement is critical
  • Proprietary wear resistant urethane
  • Can be varied to suit special applications 

 

Belt Width Inches (mm)Blade Coverage Inches (mm)Solid Blade Replacement Part NumberAssembly Part Number Air/Water TensionerAssembly Part Number Mechanical Tensioner
18 (450)12 (300)CXMD-EZ-12CSXHSMD-18-STD-EZCSXHSMD-18-MT-EZ
24 (600)18 (450)CXMD-EZ-18CSXHSMD-24-STD-EZCSXHSMD-24-MT-EZ
30 (750)24 (600)CXMD-EZ-24CSXHSMD-30-STD-EZCSXHSMD-30-MT-EZ
36 (900)30 (750)CXMD-EZ-30CSXHSMD-36-STD-EZCSXHSMD-36-MT-EZ
42 (1050)36 (900)CXMD-EZ-36CSXHSMD-42-STD-EZCSXHSMD-42-MT-EZ
48 (1200)42 (1050)CXMD-EZ-42CSXHSMD-48-STD-EZCSXHSMD-48-MT-EZ
54 (1400)48 (1200)CXMD-EZ-48CSXHSMD-54-STD-EZCSXHSMD-54-MT-EZ
60 (1500)54 (1400)CXMD-EZ-48CSXHSMD-60-STD-EZCSXHSMD-60-MT-EZ
Note that the 48" blade is the largest Medium Duty E-Z Change blade made.