Standard Duty Head Shed

Standard Duty Head Shed

Standard Line Standard Duty Head Shed Primary Cleaner

The Standard Line Standard Duty Head Shed Cleaner is made for general purpose belt cleaning of less demanding applications.  It utilizes a simplified design to save money with no sacrifice in quality construction.  The Standard Line Standard Duty Head Shed Primary Cleaner is used in power plants, wood processing, industrial, aggregate, coal prep, and some mining applications.

Click here to download the Standard Duty Head Shed Standard Line Datasheet

Click here to download the Cleaner RFQ Form

 

Standard Line Standard Duty Head Shed Primary Cleaner

The Standard Line Standard Duty Head Shed Advantages:
  • Light Duty Primary Cleaner
  • Small footprint
  • All stainless steel hardware
  • Straight though shaft design with smaller tensioners simplifies installation
  • Heavy duty mounting brackets designed for quick install
  • Standard 6" wide blades can be rotated to extend life in the center (prime wear area) of the belt
  • Standard 6" wide blades are removable with just 2 bolts per blade for easy replacement or rotation for longer blade life
  • The blade mounting shaft is removable for servicing by loosening 4 bolts (2 each side)
  • Optional solid blade (one piece blade) installs with just two bolts
 

Tensioning Systems

The Standard Line Standard Duty Head Shed is available with both Air/Water and Mechanical Tensioners.

Air/Water Tensioners (CSHSLD-STD-A)

Standard Duty Head Shed Air/Water Tensioners

  • Dual activator tensioning unit functions on plant air, water, or CO2
  • Optional air source housed in protective cabinet (Closed system provides long life to air tank)
  • Designed to provide constant tension to the cleaner
  • Suited for difficult to access locations
  • Simple valve operation allows tension to be released quickly to speed up blade changes and maintenance
  • Water regulators are provided with pressure relief valve to prevent over pressurizing. Commonly used in underground applications where service water is available and freezing is not an issue.
  • Plant air regulator systems are used in above ground applications and where freezing is an issue
  • Optional CO2 regulator systems are used in remote and mobile applications such as stacking conveyors, and remote overland discharges where plant air is not readily available
Mechanical Tensioners (CSHSLDST-01-A)

Standard Duty Head Shed Mechanical Tensioners

  • Designed to provide adjustable tension to the cleaner
  • Suited to locations that are not difficult to access
  • Requires tension to be monitored and adjusted as the blade wears
  • Lower cost system but requires more maintenance attention during its life
  • No risk of losing cleaning ability because of a failed air or water supply

Blades

The Standard Line Standard Duty Head Shed comes with a standard 6" wide blade and an optional one piece solid blade that are designed to maintain proper contact with the cleaning surface

Standard Duty Head Shed Single 6" Blade (CSHSLD-S-01)

Standard Duty Head Shed 6" Blade

  • Standard offering
  • Allows the cleaner to wear to the belt as needed
  • Better contour to a crowned pulley
  • Allows the center blades to wear independent of the outer/end blades
  • Proprietary wear resistant urethane
  • Can be varied to suit special applications

 

Standard Duty Head Shed Solid Blade (CSHSLD-SB-XX)
XX Denotes Blade Length

Standard Duty Head Shed Solid Blade

  • Use where material build-up between blades is a concern
  • Can be used in multi-primary systems
  • Proprietary wear resistant urethane
  • Installs with just one pin on each side

 

Belt Width Inches (mm)Blade Coverage Inches (mm)No. 6" (152 mm) Blades
18 (450)12 (300)2
24 (600)18 (450)3
30 (750)24 (600)4
36 (900)30 (750)5
42 (1050)36 (900)6
48 (1200)42 (1050)7
54 (1400)48 (1200)8
60 (1500)54 (1400)9
72 (1800)66 (1700)11
84 (2150)78 (2000)13
96 (2450)90 (2300)15
 

 

Belt Width Inches (mm)Solid Blade Replacement Part NumberAssembly Part Number Air/Water TensionerAssembly Part Number Mechanical Tensioner
18 (450)CSHSLD-SB-12CSHSLD-18-STD-SBCSHSLD-18-MT-SB
24 (600)CSHSLD-SB-18CSHSLD-24-STD-SBCSHSLD-24-MT-SB
30 (750)CSHSLD-SB-24CSHSLD-30-STD-SBCSHSLD-30-MT-SB
36 (900)CSHSLD-SB-30CSHSLD-36-STD-SBCSHSLD-36-MT-SB
42 (1050)CSHSLD-SB-36CSHSLD-42-STD-SBCSHSLD-42-MT-SB
48 (1200)CSHSLD-SB-42CSHSLD-48-STD-SBCSHSLD-48-MT-SB
54 (1400)CSHSLD-SB-48CSHSLD-54-STD-SBCSHSLD-54-MT-SB
60 (1500)CSHSLD-SB-54CSHSLD-60-STD-SBCSHSLD-60-MT-SB
72 (1800)CSHSLD-SB-66CSHSLD-72-STD-SBCSHSLD-72-MT-SB
84 (2150)CSHSLD-SB-66CSHSLD-84-STD-SBCSHSLD-84-MT-SB
96 (2450)CSHSLD-SB-66CSHSLD-84-STD-SBCSHSLD-84-MT-SB

 

The table shows the assembly part numbers with a solid blade.  For single  blade assembly part numbers, replace "SB" with "LD01".  

Note that the 66" is the largest Standard Duty Head Shed blade made.