Split Six Finishing Cleaner

Split Six Finishing Cleaner

Standard Line Split Six Track Finishing Cleaner

The Split Six Finishing Cleaner is designed for use as a finishing cleaner to remove fine materials and water not removed by secondary cleaners.  It is excellent in wet applications, acting as a squeegee after a series of primary and secondary cleaners.  The Split Six Finishing cleaner can also stand alone as a secondary cleaner in light applications.  

Click here to download the Split Six Finishing Cleaner Datasheet

Click here to download the Cleaner RFQ Form

 

Split Six Finishing Cleaner
The Split Six Finishing Cleaner Advantages:
  • Heavy Duty Finishing Cleaner
  • Designed to remove fine materials and water not removed by secondary cleaners
  • Excellent in wet applications, acting as a squeegee after a series of primary and secondary cleaners
  • Can stand alone as a secondary cleaner in light applications
  • Mounted behind the pulley
  • Extremely gentle blades
  • Very flexible tungsten carbide tipped blades
  • Designed with a 2 bolt quick change blade cartridge
  • Aluminum track molded in the blade base gives support for bolting to the cartridge and prevents bolt tear out
  • 6" wide blades at the base for support is split into two 3" wide segments which flex for a finger-like cleaning action
  • Both right and left end blades are molded with urethane blade tip segments to prevent damage to outer edges of belt
  • Flexes to meet the contour of the belt better than conventional secondary tungsten  blades

 

Tensioning Systems

The Split Six Finishing Cleaner is available with Mechanical Tensioners.

Mechanical Tensioners (180-40-1300)
Split Six Mechanical Tensioner
  • Designed to provide adjustable tension to the cleaner
  • Requires minimal attention throughout the life of the cleaner blades because of low contact pressure system
 

Blades

The Split Six Finishing Cleaner uses a 6 inch wide blade that is split into 3 inch individual segments to allow blades to flex for better belt contract.  Blades on the outside ends are molded with tungsten carbide inserts to prevent belt damage.

Split Six Standard Blade (CSSS-TCS090-01)
Split Six Standard Blade
 
 
Split Six Right Side Blade (CSSS-TCS090R-01)

Split Six Right Side Blade

 
Split Six Left Side Blade (CSSS-TCS090L-02)

Split Six Left Side Blade

 
Belt Width Inches (mm)Blade Coverage Inches (mm)Number of 6" (152 mm) BladesAssembly Part Number Mechanical Tensioner
 18 (450) 12 (300)2CSSS-18-MT-TCS090
 24 (600) 18 (450)CSSS-24-MT-TCS090
 30 (750) 24 (600)CSSS-30-MT-TCS090
 36 (900) 30 (750)CSSS-36-MT-TCS090
 42 (1050) 36 (900)CSSS-42-MT-TCS090
 48 (1200) 42 (1050)CSSS-48-MT-TCS090
 54 (1400) 48 (1200)CSSS-54-MT-TCS090
 60 (1500) 54 (1400)CSSS-60-MT-TCS090
 72 (1800) 66 (1700)11 CSSS-72-MT-TCS090
 84 (2150) 78 (2000)13 CSSS-84-MT-TCS090
    

 

Split Six Finishing Cleaner