Medium Duty Slide Track

Medium Duty Slide Track

Standard Line Medium Duty Slide Track Secondary Cleaner

The Standard Line Medium Duty Slide Track Cleaner is lower cost, lighter duty secondary cleaner solution than theStandard Line Mine Duty cleaner and the Standard Line Mine Duty II cleaner. It is intended for use on smaller, slower applications in power plant, industrial, pulp/paper, light aggregate, smaller coal handling, and other light applications. The rigid bar design never traps the belt between the Standard Line Medium Duty Slide Track cleaner and the pulley. 

Click here to download the Medium Duty Slide Track Standard Line Datasheet

Click here to download the Cleaner RFQ Form     

Standard Line Medium Duty Slide Track
The Tech Line Medium Duty Slide Track Advantages:
  • Designed for hard to service applications
  • Intended for use on smaller, slower applications in power, industrial, pulp/paper, light aggregate, smaller coal handling and other light applications
  • Absorbs mechanical splice with no damage to the splice or cleaner
  • Replaceable blade bar helps with service in tight applications
  • Entire blade cartridge is installed with one bolt and can be removed to a catwalk or other safe location to change the blades and re-install
  • Powder Coated shaft
  • Stainless steel blade cartridge
  • Stainless steel hardware
  • Individual locking blades with service speed of a single blade unit

 

Tensioning Systems

The Standard Line Medium Duty Slide Track Cleaner is available with Pull-Up Mechanical Tensioners.

Mechanical Pull-Up Tensioners (CSSTS-TA)

Medium Duty Slide Track Mechanical Tensioners

 

  • Designed to provide adjustable tension to the cleaner
  • Suited to locations that are not difficult to access
  • Requires tension be monitored and adjusted as the blade wears
  • No risk of losing cleaning ability because of failed air or water supply

 

Blades

The Standard Line Medium Duty Slide Track Cleaner uses both 6"  and 12" Standard Line Blades. 

Standard Line 6" Tungsten Carbide Flex Blade (CS-TF067-01)
CS-TF067-01
Standard Line 6" Tungsten Carbide Rigid Blade (CS-T068-01)
CS-T068-01
Standard Line 12" Tungsten Carbide Rigid Blade (CS-T091-02)

 

Standard Line 6" AR500 Flex Blade (CS-ARF067-01)
CS-ARF067-01
Standard Line 6" AR500 Rigid Blade (CS-AR074-01)
CS-AR074-01
 
Standard Line 12" AR500 Rigid Blade (CS-AR091-02)

CS-AR091-02

Standard Line 6" Urethane Blade (CS-U025-01)
CS-U025-01

 

 

 
Belt Width Inches (mm)Blade Coverage Inches (mm)No. 6" (152 mm) BladesAssembly Part Number Mechanical Pull-Up Tensioner
30 (750)24 (600)4CSSTMD-30-MT02-TCS068
36 (900)30 (750)5CSSTMD-36-MT02-TCS068
42 (1050)36 (900)6CSSTMD-42-MT02-TCS068
48 (1200)42 (1050)7CSSTMD-48-MT02-TCS068
54 (1400)48 (1200)8CSSTMD-54-MT02-TCS068
60 (1500)54 (1400)9CSSTMD-60-MT02-TCS068
The table shows the assembly part numbers with a CS-T068-01 blade.