Mine Duty

Mine Duty

Tech Line Mine Duty Secondary Cleaner

The Tech Line Mine Duty Cleaner provides individually tensioned blades to ensure that contact pressure across the width of the belt is even. This is important to help the blade wear to the contour of the belt, or the shape of the crowned pulley. Ideal for use in heavy mining, large quarry, ship loading, and other demanding applications with wide belts.

Click here to download the Mine Duty Tech Line Datasheet

Click here to download the Cleaner RFQ Form

Mine Duty Belt Cleaner
The Tech Line Mine Duty Secondary Cleaner Advantages:
  • Heavy Duty Secondary Cleaner
  • Extra heavy duty design to handle the toughest conditions
  • Shafts are keyed to prevent blades from turning
  • Individual tensioning allows blades to conform to the shape of the belt
  • All stainless steel hardware and blade holders
  • Powder Coated shaft
  • Interlocking blades eliminate material build-up
  • Urethane shaft hubs allow twist to lesson impact from mechanical splices, etc.
  • Also available in mechanical push-up and pull-up spring tensioning systems

Tensioning Systems

The Tech Line Mine Duty Cleaner is available with both Push-Up and Pull-Up Air/Water Tensioners and Push-Up and Pull-Up Mechanical Tensioners.  

Air/Water Tensioners 
Push-Up Air/Water Tensioner (CSMD-10-A)
Mine Duty Push-Up Air/Water Tensioner
Pull-Up Air/Water Tensioner (CSMD-10-A-P)
Mine Duty Push-Up Air/Water Tensioner
  • Designed to provide constant tension to the cleaner
  • Well suited to installations that are difficult to access
  • Simple valve operation allows tension to be released quickly to speed up blade changes and maintenance
  • Water regulators are provided with a pressure relief valve to prevent over pressurizing, commonly used in underground applications where service water is available and freezing is not an issue
  • Plant air regulator systems are used in above ground applications and where freezing is an issue
  • Optional CO2 regulator systems are used in remote and mobile applications such as stacking conveyors, and remote overland discharges where plant air is not readily available
Mechanical Tensioners 
Push-Up Mechanical Tensioner (CSMDST-01-A)

Mine Duty Push-Up Mechanical Tensioner

Pull-Up Mechanical Tensioner (CSMDST-02-A)

Mine Duty Pull-Up Mechanical Tensioner

  • Designed to provide adjustable tension to the cleaner
  • Suited to locations that are not difficult to access
  • Requires tension be monitored and adjusted as the blade wears
  • Lower cost system but requires more maintenance attention during its life
  • No risk of losing cleaning ability because of a failed air or water supply
  • Different designs for clearance only

Blades

Tech Line Blades

The Tech Line Mine Duty Cleaner uses the new Tech Line blades, which are used in the most demanding applications.  They are available in 6" segments. 

Tech Line TECH-24 Rigid 6" Blade (FD-T24168-01)
Tech Line TECH-24 Rigid 6" Blade
Tech Line TECH-24 Urethane 6" Blade (FD-U025-01)
Tech Line TECH-24 6" Urethane Blade
 
Belt Width Inches (mm)Blade Coverage Inches (mm)No. of 6" (152 mm) Blades
18 (450)12 (300)2
24 (600)18 (450)3
30 (750)24 (600)4
36 (900)30 (750)5
42 (1050)36 (900)6
48 (1200)42 (1050)7
54 (1400)48 (1200)8
60 (1500)54 (1400)9
72 (1800)66 (1700)11
84 (2150)78 (2000)13
96 (2450)90 (2300)15
 
 
Belt Width Inches (mm)Assembly Part Number Push-Up Air/Water TensionerAssembly Part Number Pull-Up Air/Water Tensioner
18 (450)FDMD-18-STD-T24FD168FDMD-18-STD02-T24FD168
24 (600)FDMD-24-STD-T24FD168FDMD-24-STD02-T24FD168
30 (750)FDMD-30-STD-T24FD168FDMD-30-STD02-T24FD168
36 (900)FDMD-36-STD-T24FD168FDMD-36-STD02-T24FD168
42 (1050)FDMD-42-STD-T24FD168FDMD-42-STD02-T24FD168
48 (1200)FDMD-48-STD-T24FD168FDMD-48-STD02-T24FD168
54 (1400)FDMD-54-STD-T24FD168FDMD-54-STD02-T24FD168
60 (1500)FDMD-60-STD-T24FD168FDMD-60-STD02-T24FD168
72 (1800)FDMD-72-STD-T24FD168FDMD-72-STD02-T24FD168
84 (2150)FDMD-84-STD-T24FD168FDMD-84-STD02-T24FD168
96 (2450)FDMD-96-STD-T24FD168FDMD-96-STD02-T24FD168
The table shows the assembly part numbers with a FD-T24168-01 Blade.

 

Belt Width Inches (mm)Assembly Part Number Push-Up Mechanical TensionerAssembly Part Number Pull-Up Mechanical Tensioner
18 (450)FDMD-18-MT01-T24FD168FDMD-18-MT02-T24FD168
24 (600)FDMD-24-MT01-T24FD168FDMD-24-MT02-T24FD168
30 (750)FDMD-30-MT01-T24FD168FDMD-30-MT02-T24FD168
36 (900)FDMD-36-MT01-T24FD168FDMD-36-STD02-T24FD168
42 (1050)FDMD-42-MT01-T24FD168FDMD-42-MT02-T24FD168
48 (1200)FDMD-48-MT01-T24FD168FDMD-48-MT02-T24FD168
54 (1400)FDMD-54-MT01-T24FD168FDMD-54-MT02-T24FD168
60 (1500)FDMD-60-MT01-T24FD168FDMD-60-MT02-T24FD168
72 (1800)FDMD-72-MT01-T24FD168FDMD-72-MT02-T24FD168
84 (2150)FDMD-84-MT01-T24FD168FDMD-84-MT02-T24FD168
96 (2450)FDMD-96-MT01-T24FD168FDMD-96-MT02-T24FD168
The table shows the assembly part numbers with a FD-T24168-01 Blade.

 

Mine Duty Dimensions